Thermal Spray Wire Nial 80/20 Tafa 79b Metco 405

Description

NiAl 80/20 can be used as an adhesive coating and require minimal surface treatment. Bond strengths in excess of 9000 psi can be obtained on blasting surfaces of gravel. It has good resistance to high temperature oxidation and abrasion, and excellent resistance to impact and bending.

Chat Now Send Inquiry

Content_1

Content_2

ProInfoAttach

ProDetailSubTitle2

Thermal Spray Wire Nial 80/20 Tafa 79b Metco 405

NiCr 80/20Equivalent: TAFA 79B, PMET 884,Sulzer Metco 405

NiAl 80/20 can be used as an adhesive coating and require minimal surface treatment. Bond strengths in excess of 9000 psi can be obtained on blasting surfaces of gravel. It has good resistance to high temperature oxidation and abrasion, and excellent resistance to impact and bending.
Application:

For arc and flame spraying systems
Bond coats
High temperature corrosion protection

Normal composition%

C	Si	S	Mn	Cr	Ni	Al	P
≤0.08	0.75-1.6	≤0.015	≤0.6	20.0-23.0	Bal.	≤0.5	≤0.02

Typical Deposit Characteristics

Typical Hardness HRB	Bond Strength PSI	Deposit Rate lbs /hr/100A	Deposit Efficiency	Machilityineab
60-75	9100	10	60-70%	Good

Wire Dimensions:
1/16''(1.6mm),2.0mm,DIN 200,wire weight per spool can be 15kgs and 12.5kgs
1/8''(3.17mm),it will be coil,weight per coil is 5kgs/10kgs/15kgs
They can be available according to your requirements.

Our main thermal spray wire

Previous: Half Hard 1.6mm/3.2mm SS316 Thermal Spray Wire Equivalent To Tafa 85t

Next: 1/16 Inch Pmet 884 Tafa 79b Nial 80/20 Wire For Bond Coats