Fecral Alloys Heating Ribbon Stranded Wire

Fecral Alloys Heating Ribbon Stranded Wire
Chat Now
Product Details
Basic Info
  • Model NO.: 134

  • Material: Fecral

  • PCD: 100mm

  • Hole: 8

  • Max. Continuous Service Temp. of Element: 950

  • Chemical Composition: Cr 12-15% Al 4.0-4.56.0% Fe Balance

  • Specification: ISO9001, ISO14001

  • HS Code: 85149090

  • Product Type: Wire

  • Carbon Content: Low Carbon

  • ET: 15mm

  • Status: Bright,Oxidized.Acid White

  • Resistivity at 20. C: 1.25+-0.08 Ohm mm2/M

  • Trademark: Ualloy

  • Origin: China

Product Description
FeCrAl alloys heating ribbon wire
1. Introduction to products
FeCrAl alloy is a ferritic iron-chromium-aluminium alloy with high resistivity and has superior oxidation resistance for use at temperatures up to 1450 centigrade degree., as compared to other commercial Fe and Ni base alloy.

2. Application
Our Products are widely applied to chemical industry, metallurgy mechanism, glass industry, ceramic industry, home appliance area and so on.

3. Properties
Grade: 1Cr13Al4
Chemical Composition: Cr 12-15% Al 4.0-4.56.0% Fe Balance
Max. Continuous service temp. Of element(° C): 950degrees
Resistivity at 20. C(μ Ω @m): 1.25+-0.08 ohm mm2/m
The allowable tolerance of alloy strip GB/T1234-2012
CategoryThickness ( mm )Tolerance ( mm)
Common precisionHigh precision 
  Cold-rolled strip0.05 ~ 0.1±0.01±0.005
0.1 ~ 0.2±0.015±0.01
0.2 ~ 0.5±0.02±0.015
0.5 ~ 1.0±0.03±0.025
1.0 ~ 1.8±0.04±0.03
1.8 ~ 2.5±0.05±0.04
2.5 ~ 4.0±0.06±0.05
Hot-rolled Strip2.5 ~ 5.0±0.25±0.2
5.0 ~ 7.0±0.3±0.25
7.0 ~ 10.0±0.4±0.35
10.0 ~ 20.0±0.5±0.45
The allowable tolerance of alloy strip GB/T1234-2012
CategoryWidth ( mm )Tolerance ( mm )
side cutNonside cut
Common precisionHigh precision 
Cold-rolled Strip5.0 ~ 10.0±0.2±0.1-0.6
10.0 ~ 20.0-0.8
20.0 ~ 30.0-1
30.0 ~ 50.0±0.3±0.15-1.2
50.0 ~ 100.0±1.0
100.0 ~ 200.0±0.5±0.25±1.5
200.0 ~ 300.0±1.8
Hot-rolled Strip15.0 ~ 60.0/±1.5
60.0 ~ 200.0±2.5
200.0 ~ 300.0±3.0


The allowable tolerance of alloy wire and rod diameter GB/T1234-2102
CategoryDiameter(mm)Tolerance(mm)
Cold-drawn steel wire 0.02 ~ 0.0250.02 ~ 0.025
0.025 ~ 0.030.025 ~ 0.03
0.03 ~ 0.050.03 ~ 0.05
0.05 ~ 0.10.05 ~ 0.1
0.1 ~ 0.30.1 ~ 0.3
0.3 ~ 0.50.3 ~ 0.5
0.5 ~ 1.00.5 ~ 1.0
1.0 ~ 3.01.0 ~ 3.0
3.0 ~ 6.03.0 ~ 6.0
6.0 ~ 8.06.0 ~ 8.0
8.0 ~ 10.08.0 ~ 10.0
Hot-finished rod5.5 ~ 12.0±0.4

Feedback