HRE Wire And Strip Can Replace Kanthal A1

HRE wire and strip can replace Kanthal A1

1.Description

HRE large-sized cold-drawn wire products can be used for high-temperature resistance furnace. Processing performance is very good; operating temperature can reach 1400℃ .

Chemical Content(%)

Mechanical Properties

Temperature Factors Of Electrical Resistivity

2.Specification

Conventional Product specifications: 0.5 ~ 10 mm

        3.Usage

It is mainly used in powder metallurgy furnace, diffusion furnace, radiant tube heater and all kinds of high temperature furnace heating body.

    4.Features

The product process is stable, integrated performance is good. Has good high temperature oxidation resistance and longer service life; excellent winding properties at room temperature processing, ease of processing molding; little rebound resilience and so on.

5.User Manual

1) Rated Voltage: 220V/380V

2) The installation process to avoid knocking, to avoid the damp, hand-held stove wire, they should wear gloves.Wire should be installed after the furnace has remained flat, and prevent surface scratches, dirt, corrosion, or improper installation, by affecting the life of

3) In the rated voltage to use. In strong reducing atmosphere, acid atmosphere, an atmosphere of high humidity will affect the use of life;

4) Temperature before use should be in dry non-corrosive atmosphere, about 1000 spend a few hours, so that furnace wire protective film formed on the surface after normal use, so that can guarantee the normal life of furnace wire;

5) Furnace installation should ensure that the insulated wire good power to avoid touching furnace after the wire,guard against electric shock or burns.