Description
Ualloy145 is a iron-chromium-aluminium alloy (FeCrAl alloy) characterized by high resistance, low coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature.It is suitable for use at temperatures up to 1250°C.
Typical applications for Ualloy145 are used in industrial electric furnace, household electrical appliance and far infrared ray device.
Normal composition%
C | P | S | Mn | Si | Cr | Ni | Al | Fe | Other |
Max | |||||||||
0.05 | 0.025 | 0.025 | 0.70 | Max 0.6 | 21.0~23.0 | Max 0.60 | 5.0~7.0 | Bal. | Nb 0.5 |
Typical Mechanical properties(1.0mm)
Yield strength | Tensile Strength | Elongation |
Mpa | Mpa | % |
550 | 725 | 22 |
Typical Physical properties
Density (g/cm3) | 7.10 |
Electrical resistivity at 20ºC(mm2/m) | 1.45 |
Conductivity coefficient at 20ºC (WmK) | 13 |
Coefficient of thermal expansion | |
Temperature | Coefficient of Thermal Expansion x10-6/ºC |
20 ºC- 1000ºC | 16 |
Specific heat capacity | |
Temperature | 20ºC |
J/gK | 0.49 |
Melting point (ºC) | 1510 |
Max continuous operating temperature in air (ºC) | 1350 |
Magnetic properties | non-magnetic |
Temperature Factor of Electrical Resistivity
20ºC | 100ºC | 200ºC | 300ºC | 400ºC | 500ºC | 700ºC | 800ºC | 900ºC | 1000ºC | 1100ºC | 1200ºC |
1 | 0.997 | 0.996 | 0.994 | 0.991 | 0.990 | 0.990 | 0.990 | 0.990 | 0.990 | 0.990 | 0.990 |
Style of supply
Alloys Name | Type | Dimension | ||
Ualloy145W | Wire | D=0.03mm~8mm | ||
Ualloy145R | Ribbon | W=0.4~40 | T=0.03~2.9mm | |
Ualloy145S | Strip | W=8~250mm | T=0.1~3.0 | |
Ualloy145F | Foil | W=6~120mm | T=0.003~0.1 | |
Ualloy145B | Bar | Dia=8~100mm | L=50~100 |
The advantages of high temperature heating strip:
Our product has a long service life and high temperature resistance, such as the maximum service temperature of HRE iron-chromium aluminium alloy wire can reach 1400ºCin the atmosphere; the oxidation resistance of the product surface is very good, the AI2O3 film formed after oxidation has a good high resistivity and resistance; and the allowable surface load is large; its specific gravity is smaller than that of nickel-chromium alloy; its resistivity is also higher and the sulfur resistance is better; but Its price is obviously lower than that of nickel-chromium alloy.
Our also can supply the service of custom made. The client just need to tell us the OD of coil and the stated power rate.
Transportation by express: